[PATCH v3 5/9] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe
From: Kishon Vijay Abraham I <hidden>
Date: 2015-12-15 09:17:00
Also in:
linux-omap, linux-pci, lkml
Subsystem:
generic phy framework, the rest · Maintainers:
Vinod Koul, Linus Torvalds
No functional change. Previously omap_control_phy_power() was used to power off the PHY during probe. But once PIPE3 driver is adapted to use syscon, omap_control_phy_power() cannot be used. Hence used ti_pipe3_power_off to power off the PHY. Signed-off-by: Kishon Vijay Abraham I <redacted> Acked-by: Roger Quadros <redacted> --- drivers/phy/phy-ti-pipe3.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 1991efd..0ce4194 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c@@ -475,8 +475,6 @@ static int ti_pipe3_probe(struct platform_device *pdev) if (ret) return ret; - omap_control_phy_power(phy->control_dev, 0); - platform_set_drvdata(pdev, phy); pm_runtime_enable(dev);
@@ -495,6 +493,9 @@ static int ti_pipe3_probe(struct platform_device *pdev) return PTR_ERR(generic_phy); phy_set_drvdata(generic_phy, phy); + + ti_pipe3_power_off(generic_phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) return PTR_ERR(phy_provider);
--
1.7.9.5