Re: [PATCH v2 02/19] PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver

On 2015년 12월 10일 10:25, Krzysztof Kozlowski wrote:

On 10.12.2015 09:49, Chanwoo Choi wrote:

quoted

Hi,

(...)

quoted

quoted

quoted

+
+	bus_dmc: bus_dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_dmc CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_dmc_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {

Maybe use convention with frequency, like:
	opp@50000000
This also used in opp.txt examples.

In the Documentations/devicetree/bindings/opp/opp.txt,
the example uses the 'opp@0x'. I check the opp.txt of Linux 4.4-rc4.

Yes, it was changed by Viresh in "PM / OPP: Rename OPP nodes as
opp@<opp-hz>". You can find the most actual bindings in linux-next.

OK. I'll.

Best Regards,
Chanwoo Choi