On 11/13/2015 07:38 AM, Rob Herring wrote:

On Thu, Nov 12, 2015 at 09:27:21AM +0800, Yakir Yang wrote:

quoted

Hi Rob,

On 11/12/2015 07:10 AM, Rob Herring wrote:

quoted

On Fri, Oct 30, 2015 at 09:09:15AM +0800, Yakir Yang wrote:

quoted

Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.

This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.

Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Javier Martinez Canillas <redacted>
Signed-off-by: Yakir Yang <redacted>
---

I didn't find this one in v10. Did it get dropped?

You are in my 'to' list, but I haven't send the whole v10 out,
most of them don't need update :)

Okay, it's just gmail's inability to follow threading...
  

quoted

This series should be:
---- [v8 0/17 ...]
   |---- [v8 1/17 ...]
   |---- [v8 2/17 ...]
   |---- [v8 3/17 ...]
   |---- [...]
   |---- [v8 15/17 ...]
   |---- [v8 16/17 ...]
   |---- [v8 17/17 ...]
   |
   |---- [v9 10/17 ...]
   |---- [v9 15/17 ...]
      |---- We are here
   |---- [v9 09/17 ...]
   |---- [v10 09/17 ...]
      |---- Received an acked from you

quoted

quoted

quoted

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..74f0e80 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt

@@ -22,6 +22,9 @@ Required properties for dp-controller:
  		from general PHY binding: Should be "dp".
  Optional properties for dp-controller:
+	-analogix,need-force-hpd:
+		Indicate driver need force hpd when hpd detect failed, this
+		is used for some eDP screen which don't have hpd signal.

This should be a generic property.

This property would only need in some no-hpd case, it would be dropped if
panel keep the hotplug signal, that's why I thought it should be optional.

I agree it is optional. I just mean drop the analogix and put in a
common binding doc (i.e. create a display/bridge/common.txt). Needing to
ignore HPD is probably a common problem.

Oops, okay, I misunderstand what you mean. I thought you want me to put the
"analogix,need-force-hpd" to required property, not an optional property :)

I thought this should be a common property of connect, so the common 
document
in bridge is not very good, I should be in display/connector/, but I 
don't know what
else could I collect for that common document, would like to share more 
on this point

- Yakir

quoted

I thought if we put this a property to generic property, then we must need
to define it in normal device node, not sure whether it is right :)

Sorry, I don't follow.

Rob