[PATCH v3 2/5] Documentation: devicetree: Add DT bindings to eeprom_93xx46 driver.
From: Cory Tusar <hidden>
Date: 2015-11-25 05:32:18
Also in:
lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This commit documents bindings to be added to the eeprom_93xx46 driver
which will allow:
- Device word size and read-only attributes to be specified.
- A device-specific compatible string for use with Atmel AT93C46D
EEPROMs.
- Specifying a GPIO line to function as a 'select' or 'enable' signal
prior to accessing the EEPROM.
Signed-off-by: Cory Tusar <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/misc/eeprom-93xx46.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
new file mode 100644
index 0000000..a8ebb46
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt@@ -0,0 +1,25 @@ +EEPROMs (SPI) compatible with Microchip Technology 93xx46 family. + +Required properties: +- compatible : shall be one of: + "atmel,at93c46d" + "eeprom-93xx46" +- data-size : number of data bits per word (either 8 or 16) + +Optional properties: +- read-only : parameter-less property which disables writes to the EEPROM +- select-gpios : if present, specifies the GPIO that will be asserted prior to + each access to the EEPROM (e.g. for SPI bus multiplexing) + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. In particular, "reg" and "spi-max-frequency" properties must be given. + +Example: + eeprom@0 { + compatible = "eeprom-93xx46"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cs-high; + data-size = <8>; + select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + };
--
2.4.10