Am Donnerstag, 8. Oktober 2015, 15:31:11 schrieb Sjoerd Simons:

This patchset adds support for the Rockchip SPDIF transceiver as present
on RK3066, RK3188 and RK3288 boards and enables it on a Radxa rock pro.
Tested on a Radxa Rock Pro board and Radxa Rock 2 Square board.

Quite a few changes since v3 (mostly based on review comment). One
important addition is proper RK3288 SoC support; While according to the
documentation it has 2 SPDIF "solutions" with the default being the old
one, this variation doesn't actually work.. So support has been added
to switch to the new SPDIF solution on RK3288.

[...]

Sjoerd Simons (8):
  ASoC: dt-bindings: add rockchip tranceiver bindings
  ASoC: rockchip: Add rockchip SPDIF transceiver driver
  ARM: dts: rockchip: Add SPDIF transceiver for RK3188
  ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock
  clk: rockchip: Allow the RK3288 SPDIF clocks to change their parent
  ARM: dts: rockchip: Add SPDIF transceiver for RK3288
  ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock2 Square
  ARM: multi_v7_defconfig: Add rockchip audio support

After Mark took the two ASoC-specific patches, I've now picked up the 4 dts 
patches, after removing the #address- and #size-cells lines from them.

Sjoerd, are you sending a followup patch to Mark to also drop them from the 
binding doc?

Hopefully the clock patch will also find its way into the clock tree, together 
with the base series for the frac dividers.

And I guess we'll need to prod the armsoc-guys to take the defconfig change 
too :-)


Heiko