[PATCH 3/5] ARM: dts: berlin: add axi clock for BG2Q sdhci0 and sdhci1
From: Jisheng Zhang <hidden>
Date: 2015-10-12 05:50:57
Also in:
linux-arm-kernel, linux-clk, linux-mmc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add the axi clock for BG2Q's sdhci0 and sdhci1. This would let the axi clock be disabled during runtime pm, so saves power a bit. Signed-off-by: Jisheng Zhang <redacted> --- arch/arm/boot/dts/berlin2q.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 2f12048..a14c9e8 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi@@ -102,7 +102,8 @@ sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; - clocks = <&chip_clk CLKID_SDIO1XIN>; + clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; + clock-names = "core", "axi"; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
@@ -110,7 +111,8 @@ sdhci1: sdhci@ab0800 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0800 0x200>; - clocks = <&chip_clk CLKID_SDIO1XIN>; + clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>; + clock-names = "core", "axi"; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
--
2.6.1