[PATCH v3 1/5] dt-bindings: net: Broadcom iProc MDIO bus driver device tree binding
From: Arun Parameswaran <hidden>
Date: 2015-10-06 19:27:59
Also in:
lkml, netdev
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add device tree binding documentation for the Broadcom iProc MDIO bus driver. Signed-off-by: Arun Parameswaran <redacted> --- .../devicetree/bindings/net/brcm,iproc-mdio.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
new file mode 100644
index 0000000..8ba9ed1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt@@ -0,0 +1,23 @@ +* Broadcom iProc MDIO bus controller + +Required properties: +- compatible: should be "brcm,iproc-mdio" +- reg: address and length of the register set for the MDIO interface +- #size-cells: must be 1 +- #address-cells: must be 0 + +Child nodes of this MDIO bus controller node are standard Ethernet PHY device +nodes as described in Documentation/devicetree/bindings/net/phy.txt + +Example: + +mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #size-cells = <1>; + #address-cells = <0>; + + enet-gphy@0 { + reg = <0>; + }; +};
--
2.5.2