Re: [PATCH 1/4] dt-bindings: net: Broadcom iProc MDIO bus driver device tree binding
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2015-09-30 21:36:20
Also in:
lkml, netdev
On 30/09/15 13:32, Arun Parameswaran wrote:
quoted hunk ↗ jump to hunk
Add device tree binding documentation for the Broadcom iProc MDIO bus driver. Signed-off-by: Arun Parameswaran <redacted> --- .../devicetree/bindings/net/brcm,iproc-mdio.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.txtdiff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt new file mode 100644 index 0000000..689f97c --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt@@ -0,0 +1,23 @@ +* Broadcom iProc MDIO bus controller + +Required properties: +- compatible: should be "brcm,iproc-mdio" +- reg: address and length of the register set for the MDIO interface +- #size-cells: must be 1 +- #address-cells: must be 0 + +Child nodes of this MDIO bus controller node are standard Ethernet PHY device +nodes as described in Documentation/devicetree/bindings/net/phy.txt + +Example: + +mdio@0x18002000 {
Sorry for not catching this earlier, you might want to drop the leading 0x here from your example, other than that: Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -- Florian