[PATCH 0/2] Add support to make output voltage determined by VSET2[] bits

The patch is to add support to make the output voltage of ACT8865
DC/DC regulator determined by VSET2[] bits. The DT property
"active-semi,vsel-high" is used to specify the VSEL pin at high
on the board. When the VSEL pin is high, output voltage is programmed
by VSET2[] bits.


Wenyou Yang (2):
  regulator: act8865: support output voltage by VSET2[] bits
  regulator: act8865: add DT binding for property
    "active-semi,vsel-high"

 .../bindings/regulator/act8865-regulator.txt       |    3 +++
 drivers/regulator/act8865-regulator.c              |   24 ++++++++++++++++++--
 2 files changed, 25 insertions(+), 2 deletions(-)

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html