[PATCH 1/3] dt-bindings: thermal: Add binding document for Mediatek thermal controller
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: 2015-09-23 13:38:14
Also in:
linux-arm-kernel, linux-mediatek, linux-pm, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, thermal · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
This adds the device tree binding documentation for the mediatek thermal controller found on Mediatek MT8173 and other SoCs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Daniel Kurtz <redacted> --- .../bindings/thermal/mediatek-thermal.txt | 38 ++++++++++++++++++++++ include/dt-bindings/thermal/mt8173.h | 13 ++++++++ 2 files changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt create mode 100644 include/dt-bindings/thermal/mt8173.h
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
new file mode 100644
index 0000000..1697375
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt@@ -0,0 +1,38 @@ +* Mediatek Thermal + +This describes the device tree binding for the Mediatek thermal controller +which measures the on-SoC temperatures. This device does not have its own ADC, +instead it directly controls the AUXADC via AHB bus accesses. For this reason +this device needs phandles to the AUXADC. Also it controls a mux in the +apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS +is also needed. + +Required properties: +- compatible: "mediatek,mt8173-thermal" +- reg: Address range of the thermal controller +- interrupts: IRQ for the thermal controller +- clocks, clock-names: Clocks needed for the thermal controller. required + clocks are: + "therm": Main clock needed for register access + "auxadc": The AUXADC clock +- resets: Reference to the reset controller controlling the thermal controller. +- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses +- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller. +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. See + include/dt-bindings/thermal/mt8173.h for valid sensor + numbers. + +Example: + + thermal: thermal@1100b000 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt8173-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT8173_PERI_THERM_SW_RST>; + reset-names = "therm"; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + };
diff --git a/include/dt-bindings/thermal/mt8173.h b/include/dt-bindings/thermal/mt8173.h
new file mode 100644
index 0000000..692e74c
--- /dev/null
+++ b/include/dt-bindings/thermal/mt8173.h@@ -0,0 +1,13 @@ +/* + * This header provides constants for mediatek,mt8173-thermal + */ + +#ifndef _DT_BINDINGS_THERMAL_MEDIATEK_MT8173_H +#define _DT_BINDINGS_THERMAL_MEDIATEK_MT8173_H + +#define MT8173_THERMAL_ZONE_CA53 0 +#define MT8173_THERMAL_ZONE_CA57 1 +#define MT8173_THERMAL_ZONE_GPU 2 +#define MT8173_THERMAL_ZONE_CORE 3 + +#endif /* _DT_BINDINGS_THERMAL_MEDIATEK_MT8173_H */
--
2.5.1