[PATCH v2 1/2] arm64: dts: qcom: 8x16: UART1 add CTS_N, RTS_N pin configurations
From: Ivan T. Ivanov <hidden>
Date: 2015-09-18 13:19:03
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Add devicetree bindings for UART1 CTS_N and RTS_N pins. Signed-off-by: Ivan T. Ivanov <redacted> --- arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 42941b977c48..f9b74bb14d31 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi@@ -16,10 +16,13 @@ blsp1_uart1_default: blsp1_uart1_default { pinmux { function = "blsp_uart1"; - pins = "gpio0", "gpio1"; + // TX, RX, CTS_N, RTS_N + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; }; pinconf { - pins = "gpio0", "gpio1"; + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; drive-strength = <16>; bias-disable; };
@@ -28,10 +31,12 @@ blsp1_uart1_sleep: blsp1_uart1_sleep { pinmux { function = "gpio"; - pins = "gpio0", "gpio1"; + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; }; pinconf { - pins = "gpio0", "gpio1"; + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; drive-strength = <2>; bias-pull-down; }; --
1.9.1