[PATCH 1/2] arm64: dts: qcom: 8x16: Add UART1 configuration nodes
From: Ivan T. Ivanov <hidden>
Date: 2015-09-12 13:03:56
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Add devicetree bindings for UART1 pins and device controller with DMA channel specifiers. Signed-off-by: Ivan T. Ivanov <redacted> --- arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 29 +++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8916.dtsi | 12 ++++++++++++ 2 files changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 568956859088..1330a7a6bcf1 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi@@ -13,6 +13,35 @@ &msmgpio { + blsp1_uart1_default: blsp1_uart1_default { + pinmux { + function = "blsp_uart1"; + // TX, RX, CTS_N, RTS_N + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + }; + pinconf { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart1_sleep: blsp1_uart1_sleep { + pinmux { + function = "blsp_uart1"; + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + }; + pinconf { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + drive-strength = <2>; + bias-pull-down; + }; + }; + blsp1_uart2_default: blsp1_uart2_default { pinmux { function = "blsp_uart2";
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5911de008dd5..f10ff7a2d0e3 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi@@ -102,6 +102,18 @@ reg = <0x1800000 0x80000>; }; + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 1>, <&blsp_dma 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + blsp1_uart2: serial@78b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78b0000 0x200>; --
1.9.1