Hi Srinivas,
hi Andrew,
[add Sanchayan and Philipp]
Srinivas Kandagatla [off-list ref] hat am 10. August 2015 um
12:37 geschrieben:
Hi Andrew,
On 09/08/15 16:19, Andrew Lunn wrote:
quoted
Hi Srinivas
The AT24 eeprom driver contains the comment:
/*
* Export the EEPROM bytes through sysfs, since that's convenient.
* By default, only root should see the data (maybe passwords etc)
*/
and as you would expect from this:
# ls -l
./devices/platform/soc/soc:aips-bus@40000000/40066000.i2c/i2c-0/0-0050/eeprom
-rw------- 1 root root 512 Aug 9 10:16
./devices/platform/soc/soc:aips-bus@40000000/40066000.i2c/i2c-0/0-0050/eeprom
The AT25 and the MAX6875 driver are the same.
However nvmem has different defaults:
# ls -l
./devices/platform/soc/soc:aips-bus@40000000/40066000.i2c/i2c-0/0-0050/0-00500/nvmem
-rw-r--r-- 1 root root 0 Aug 9 10:16
./devices/platform/soc/soc:aips-bus@40000000/40066000.i2c/i2c-0/0-0050/0-00500/nvmem
Yes, nvmem by default sets the read permission for everyone S_IRUGO.
Which was the most common use case.
i can only speak for mxs-ocotp, but root-only access is sufficient.
quoted
Has this been considered and discussed?
Thanks for bringing this up, No, we did not discuss this explicitly, but
it should not be an issue to accommodate this. Provider still have
flexibility to configure such things.
IMHO it would better the default settings of the framework would be compatible
and same restrictive as the eeprom drivers.
In case a provider needs more privileges, it should be his job.
As a first patchset we wanted to keep the framework simple and add
features as we move on.
That's true, but it's an ABI too. So changing default settings soon is better.
Regards
Stefan
Thanks,
srini
quoted
Thanks
Andrew
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel