Re: [PATCH 10/10] ARM: dts: omap4: Use "syscon-otghs" instead of "ctrl-module" in USB node

Hi Roger,

On Wednesday 05 August 2015 01:38 PM, Roger Quadros wrote:

On 05/08/15 11:02, Roger Quadros wrote:

quoted

Kishon,

On 04/08/15 18:30, Kishon Vijay Abraham I wrote:

quoted

Add "syscon-otghs" property and remove the deprecated "ctrl-module"
property from MUSB devicetree node.

Since "omap_control_usbotg" devicetree node is no longer used, remove
it.

Signed-off-by: Kishon Vijay Abraham I <redacted>
---
 arch/arm/boot/dts/omap4.dtsi |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index b27634d..2fb49a5 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi

@@ -854,12 +854,6 @@
 			};
 		};
 
-		omap_control_usbotg: control-phy@4a00233c {
-			compatible = "ti,control-phy-otghs";
-			reg = <0x4a00233c 0x4>;
-			reg-names = "otghs_control";
-		};
-
 		usb_otg_hs: usb_otg_hs@4a0ab000 {
 			compatible = "ti,omap4-musb";
 			reg = <0x4a0ab000 0x7ff>;

@@ -872,7 +866,7 @@
 			multipoint = <1>;
 			num-eps = <16>;
 			ram-bits = <12>;
-			ctrl-module = <&omap_control_usbotg>;
+			syscon-otghs = <&scm_conf 0x33c>;

All other properties were of the format "syscon-phy-foo".
Why use a different format here?

Ah, looks like we don't have a dedicated phy driver for this?
We will need to add a PHY driver I guess then and handle this register
in that driver rather than in the musb driver.

I was explaining in the other thread to Tony on why this shouldn't be done in a
PHY driver [1].

Thanks
Kishon

[1] -> https://lkml.org/lkml/2015/8/5/455