Re: [PATCH v7 08/23] usb: chipidea: set usb otg capabilities

On Mon, Jul 13, 2015 at 09:03:14AM +0800, Peter Chen wrote:

On Thu, Jul 09, 2015 at 09:22:09PM +0800, Li Jun wrote:

quoted

On Thu, Jul 09, 2015 at 11:57:39AM +0300, Roger Quadros wrote:

quoted

Hi,

On 09/07/15 10:18, Li Jun wrote:

quoted

Init and update otg capabilities by DT, set gadget's otg capabilities
accordingly.

Signed-off-by: Li Jun <redacted>
---
 drivers/usb/chipidea/core.c  | 15 +++++++++++++++
 drivers/usb/chipidea/udc.c   |  7 ++++++-
 include/linux/usb/chipidea.h |  1 +
 3 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 74fea4f..1e6d5f0 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c

@@ -560,6 +560,8 @@ static irqreturn_t ci_irq(int irq, void *data)
 static int ci_get_platdata(struct device *dev,
 		struct ci_hdrc_platform_data *platdata)
 {
+	int ret;
+
 	if (!platdata->phy_mode)
 		platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
 

@@ -588,6 +590,19 @@ static int ci_get_platdata(struct device *dev,
 				of_usb_host_tpl_support(dev->of_node);
 	}
 
+	if (platdata->dr_mode == USB_DR_MODE_OTG) {
+		/* We can support HNP and SRP of OTG 2.0 */
+		platdata->ci_otg_caps.otg_rev = 0x0200;
+		platdata->ci_otg_caps.hnp_support = true;
+		platdata->ci_otg_caps.srp_support = true;
+
+		/* Update otg capabilities by DT properties */
+		ret = of_usb_update_otg_caps(dev->of_node,
+					&platdata->ci_otg_caps);
+		if (ret)
+			return ret;
+	}
+
 	if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
 		platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
 

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 764f668..b7cca3e 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c

@@ -1827,6 +1827,7 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
 static int udc_start(struct ci_hdrc *ci)
 {
 	struct device *dev = ci->dev;
+	struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
 	int retval = 0;
 
 	spin_lock_init(&ci->lock);

@@ -1834,8 +1835,12 @@ static int udc_start(struct ci_hdrc *ci)
 	ci->gadget.ops          = &usb_gadget_ops;
 	ci->gadget.speed        = USB_SPEED_UNKNOWN;
 	ci->gadget.max_speed    = USB_SPEED_HIGH;
-	ci->gadget.is_otg       = ci->is_otg ? 1 : 0;
 	ci->gadget.name         = ci->platdata->name;
+	ci->gadget.otg_caps	= otg_caps;
+
+	if (otg_caps->hnp_support || otg_caps->srp_support ||
+					otg_caps->adp_support)
+		ci->gadget.is_otg = 1;

It seems there are non OTG capable dual-role only ci controllers as well
looking at ci_get_otg_capable() code.

If so then this should be
	if (ci->is_otg && (otg_caps->hnp_support || otg_caps->srp_support ||
			   otg_caps->adp_support))
		ci->gadget.is_otg = 1

cheers,
-roger

Seems it was in my previous version but dropped it by mistake later,
I will add it.

After you adding roger's comments, add my ack.

Acked-by: Peter Chen <redacted>

am I getting a new version for this patch ?

-- 
balbi