Re: [PATCH v3 1/2] iio: light: DT binding docs for APDS9960 driver

Ok will fix in v4. Please review the 2/2 patch when you get a chance :)

On Mon, Jul 13, 2015 at 2:42 AM, Jonathan Cameron [off-list ref] wrote:

On 13 July 2015 03:20:42 BST, Matt Ranostay [off-list ref] wrote:

quoted

Document compatible string, and required DT properties for APDS9960
chipset driver.

Reviewed-by: Marek Vasut <redacted>
Signed-off-by: Matt Ranostay <redacted>
---
.../devicetree/bindings/iio/light/apds9960.txt        | 19
+++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644
Documentation/devicetree/bindings/iio/light/apds9960.txt

diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt

b/Documentation/devicetree/bindings/iio/light/apds9960.txt
new file mode 100644
index 0000000..7a47d28

--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt

@@ -0,0 +1,19 @@
+* Avago APDS9960 gesture/RGB/ALS/proximity sensor
+
+http://www.avagotech.com/docs/AV02-4191EN
+
+Required properties:
+
+  - compatible: must be "avago,apds9960"
+  - reg: the I2c address of the sensor
+  - interrupt-parent: should be the phandle for the interrupt

controller
+  - interrupts: interrupt mapping for GPIO IRQ

Usual trick here is to cross reference the interrupt bindings doc to allow all the
 complexity without duplicating docs too much.

quoted

+
+Example:
+
+apds9960@39 {
+      compatible = "avago,apds9960";
+      reg = <0x39>;
+      interrupt-parent = <&gpio1>;
+      interrupts = <16 1>;
+};

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.