Re: [PATCH v3 2/2] iio: light: opt3001: Add device tree binding documentation
From: Jonathan Cameron <hidden>
Date: 2015-07-05 14:09:01
Also in:
linux-iio
On 02/07/15 23:27, Andreas Dannenberg wrote:
Signed-off-by: Andreas Dannenberg <redacted>
Utterly standard binding so unless someone shouts, I'll pick this up with the driver. Thanks, Jonathan
quoted hunk
--- .../devicetree/bindings/iio/light/opt3001.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/opt3001.txtdiff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt new file mode 100644 index 0000000..d5f0765 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt@@ -0,0 +1,18 @@ +* Texas Instruments OPT3001 Ambient Light Sensor + +http://www.ti.com/product/opt3001 + +Required properties: + - compatible: should be "ti,opt3001" + - reg: the I2C address of the sensor + - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge) + +Example: + +opt3001@44 { + compatible = "ti,opt3001"; + reg = <0x44>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; +};