Re: [PATCH 12/17] ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt node
From: Nishanth Menon <nm@ti.com>
Date: 2015-07-29 19:38:20
Also in:
linux-arm-kernel, linux-mmc, linux-omap, lkml
On 07/29/2015 06:09 AM, Kishon Vijay Abraham I wrote:
quoted hunk ↗ jump to hunk
For beagle x15, both the vdd and io lines are connected to the same regulator (ldo1_reg). However vmmc_aux is populated to vdd_3v3. Remove it. Signed-off-by: Kishon Vijay Abraham I <redacted> --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 - 1 file changed, 1 deletion(-)diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index a63bf78..d0db5c5 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts@@ -579,7 +579,6 @@ pinctrl-0 = <&mmc1_pins_default>; vmmc-supply = <&ldo1_reg>; - vmmc_aux-supply = <&vdd_3v3>; pbias-supply = <&pbias_mmc_reg>; bus-width = <4>; cd-gpios = <&gpio6 27 0>; /* gpio 219 */
Acked-by: Nishanth Menon <nm@ti.com> -- Regards, Nishanth Menon