Update header file with required macros for 32KHz buffered clock
output of 88PM800 family of device.
These macros will be used in clk provider driver.

Signed-off-by: Vaibhav Hiremath <redacted>
---
 include/linux/mfd/88pm80x.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index 05d9bad..680e4eb 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h

@@ -91,6 +91,7 @@ enum {
 /* Referance and low power registers */
 #define PM800_LOW_POWER1		(0x20)
 #define PM800_LOW_POWER2		(0x21)
+#define PM800_LOW_POWER2_XO_LJ_EN	BIT(5)
 
 #define PM800_LOW_POWER_CONFIG3		(0x22)
 #define PM800_LDOBK_FREEZE		BIT(7)

@@ -138,6 +139,13 @@ enum {
 #define PM800_ALARM			BIT(5)
 #define PM800_RTC1_USE_XO		BIT(7)
 
+#define PM800_32K_OUTX_SEL_MASK		(0x3)
+/* 32KHz clk output sel mode */
+#define PM800_32K_OUTX_SEL_ZERO		(0x0)
+#define PM800_32K_OUTX_SEL_INT_32KHZ	(0x1)
+#define PM800_32K_OUTX_SEL_XO_32KHZ	(0x2)
+#define PM800_32K_OUTX_SEL_HIZ		(0x3)

 /* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */
 
 /* buck registers */

@@ -208,6 +216,10 @@ enum {
 #define PM800_PMOD_MEAS1		0x52
 #define PM800_PMOD_MEAS2		0x53
 
+/* Oscillator control */
+#define PM800_OSC_CNTRL1		(0x50)
+#define PM800_OSC_CNTRL1_OSC_FREERUN_EN	BIT(1)
+
 #define PM800_GPADC0_MEAS1		0x54
 #define PM800_GPADC0_MEAS2		0x55
 #define PM800_GPADC1_MEAS1		0x56