Re: [PATCH 1/2] arm64: dts: Add dts files for Marvell Berlin4CT SoC

Hi,

+/dts-v1/;
+
+/memreserve/ 0x00000000 0x01000000;

What's this reservation for?

Given you're using PSCI I can't see why we'd expect the kernel to map
but not use some memory.

+
+#include "berlin4ct.dtsi"
+
+/ {
+	model = "MARVELL BG4CT DMP BOARD";
+	compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};

You shouldn't need those bootargs; "earlyprintk" does nothing on arm64.

[...]

+		gic: interrupt-controller@901000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x901000 0x1000>,
+			      <0x902000 0x1000>,
+			      <0x904000 0x2000>,
+			      <0x906000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+

I believe the size of the cpu interface (the second reg entry) should be
0x2000, as GICC_DIR is at offset 0x1000.

Otherwise this looks fine.

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html