[PATCH 2/7] Documentation: dt: brcmstb: add waketimer documentation
From: Brian Norris <computersforpeace@gmail.com>
Date: 2015-06-19 00:12:29
Also in:
linux-arm-kernel, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Signed-off-by: Brian Norris <computersforpeace@gmail.com> --- .../bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt
diff --git a/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt
new file mode 100644
index 000000000000..68c4329b6af0
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/brcmstb/brcm,brcmstb-waketimer.txt@@ -0,0 +1,20 @@ +* Broadcom STB Wake-up Timer + +The Broadcom STB wake-up timer provides a high-resolution timer, with the +ability to wake up the system from low-power suspend/standby modes. + +Required properties: +- compatible : should contain "brcm,brcmstb-waketimer" +- reg : the register start and length for the WKTMR block +- interrupts : The TIMER interrupt +- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2 + interrupt controller node + +Example: + +waketimer@f0411580 { + compatible = "brcm,brcmstb-waketimer"; + reg = <0xf0411580 0x14>; + interrupts = <0x3>; + interrupt-parent = <&aon_pm_l2_intc>; +};
--
1.9.1