On 08/06/15 21:07, Stefan Agner wrote:

On 2015-06-08 19:49, Rob Herring wrote:

quoted

On Wed, May 27, 2015 at 7:47 AM, Stefan Agner [off-list ref] wrote:

quoted

Support configurable conversion mode through sysfs. So far, the
mode used was low-power, which is enabled by default now. Beside
that, the modes normal and high-speed are selectable as well.

Use the new device tree property which specifies the maximum ADC
conversion clock frequencies. Depending on the mode used, the
available resulting conversion frequency are calculated
dynamically.

Acked-by: Fugang Duan <redacted>
Signed-off-by: Stefan Agner <redacted>
---
 Documentation/ABI/testing/sysfs-bus-iio-vf610      |   7 +
 .../devicetree/bindings/iio/adc/vf610-adc.txt      |   9 ++
 drivers/iio/adc/vf610_adc.c                        | 146 +++++++++++++++------
 3 files changed, 120 insertions(+), 42 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-vf610

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-vf610 b/Documentation/ABI/testing/sysfs-bus-iio-vf610
new file mode 100644
index 0000000..ecbc1f4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-vf610

@@ -0,0 +1,7 @@
+What:          /sys/bus/iio/devices/iio:deviceX/conversion_mode
+KernelVersion: 4.2
+Contact:       linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
+Description:
+               Specifies the hardware conversion mode used. The three
+               available modes are "normal", "high-speed" and "low-power",
+               where the last is the default mode.

diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
index 1a4a43d..3eb40e2 100644
--- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt

@@ -11,6 +11,13 @@ Required properties:
 - clock-names: Must contain "adc", matching entry in the clocks property.
 - vref-supply: The regulator supply ADC reference voltage.

+Recommended properties:
+- fsl,adck-max-frequency: Maximum frequencies according to datasheets operating
+  requirements. Three values are required, depending on conversion mode:
+  - Frequency in normal mode (ADLPC=0, ADHSC=0)
+  - Frequency in high-speed mode (ADLPC=0, ADHSC=1)
+  - Frequency in low-power mode (ADLPC=1, ADHSC=0)

Why is this "adck" rather than "adc"?

That is the name of the clock according to the reference manual and data
sheet.

quoted

How is this related to today's patch adding min-sample-time?

It is related in that this clock is the base to calculate the sampling
time, but otherwise not really related. Afaik, not respecting the
maximum clock frequency is probably more a issue for the SAR part of the
ADC.

Rob, are you happy with Stefan's responses?

--
Stefan

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html