[PATCH 26/28] ARC: [axs101] Prepare for AXS103
From: Vineet Gupta <hidden>
Date: 2015-06-09 11:53:20
Also in:
linux-arch, lkml
Subsystem:
synopsys arc architecture, synopsys arc sdp platform support, the rest · Maintainers:
Vineet Gupta, Alexey Brodkin, Linus Torvalds
From: Alexey Brodkin <abrodkin@synopsys.com> To avoid duplicating the MB DTS file, move the MB intc entry into cpu card specific file Cc: Grant Likely <redacted> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Vineet Gupta <redacted> --- arch/arc/boot/dts/axc001.dtsi | 21 +++++++++++++++++++++ arch/arc/boot/dts/axs10x_mb.dtsi | 17 ----------------- 2 files changed, 21 insertions(+), 17 deletions(-)
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index 6990ca45fc7b..a5e2726a067e 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi@@ -69,6 +69,27 @@ }; }; + /* + * This INTC is actually connected to DW APB GPIO + * which acts as a wire between MB INTC and CPU INTC. + * GPIO INTC is configured in platform init code + * and here we mimic direct connection from MB INTC to + * CPU INTC, thus we set "interrupts = <7>" instead of + * "interrupts = <12>" + * + * This intc actually resides on MB, but we move it here to + * avoid duplicating the MB dtsi file given that IRQ from + * this intc to cpu intc are different for axs101 and axs103 + */ + mb_intc: dw-apb-ictl@0xe0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0xe0012000 0x200 >; + interrupt-controller; + interrupt-parent = <&cpu_intc>; + interrupts = < 7 >; + }; + memory { #address-cells = <1>; #size-cells = <1>;
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 5d06f1fb4266..f3db32154973 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi@@ -36,23 +36,6 @@ }; }; - /* - * This INTC is actually connected to DW APB GPIO - * which acts as a wire between MB INTC and CPU INTC. - * GPIO INTC is configured in platform init code - * and here we mimic direct connection from MB INTC to - * CPU INTC, thus we set "interrupts = <7>" instead of - * "interrupts = <12>" - */ - mb_intc: dw-apb-ictl@0x12000 { - #interrupt-cells = <1>; - compatible = "snps,dw-apb-ictl"; - reg = < 0x12000 0x200 >; - interrupt-controller; - interrupt-parent = <&cpu_intc>; - interrupts = < 7 >; - }; - ethernet@0x18000 { #interrupt-cells = <1>; compatible = "snps,dwmac";
--
1.9.1