-----Original Message-----
From: Jia Hongtao [mailto:hongtao.jia-KZfg59tc24xl57MIdRCFDg@public.gmane.org]
Sent: Wednesday, April 15, 2015 4:18 PM
To: Wood Scott-B07421
Cc: linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org;
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org; rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org; Jia Hongtao-B38951
Subject: [PATCH V2] QorIQ/TMU: add TMU node to device tree for QorIQ
T104x

This is Thermal Monitoring Unit for QorIQ platform.

Signed-off-by: Jia Hongtao <redacted>
---
Changes from V1:
* Provide more details on compatible and calibration properties.

 .../devicetree/bindings/thermal/qoriq-thermal.txt  | 68
++++++++++++++++++
 arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi   | 82
++++++++++++++++++++++
 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi        |  1 +
 3 files changed, 151 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/qoriq-
thermal.txt
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi

diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt

b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
new file mode 100644
index 0000000..48e7fff

--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt

@@ -0,0 +1,68 @@
+* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
+
+Required properties:
+- compatible : Must include "fsl,qoriq-tmu". The version of the device

is
+	determined by the TMU IP Block Revision Register (IPBRR0) at
+	offset 0x0BF8.
+	Table of correspondences between IPBRR0 values and example  chips:
+		Value           Device
+		----------      -----
+		0x01900102      T1040
+- reg : Address range of TMU registers.
+- interrupts : Contains the interrupt for TMU.
+- calibration : Calibration table for TMU. This is required to determine
+	what a specific sensor reading translates to in degrees Celsius.
+	There are four calibration config ranges, for each range we need
+	a couple of calibration data formatted like <TTCFGR, TSCFGR>.
+	Freescale provides the data required.
+
+Example:
+
+tmu@f0000 {
+	compatible = "fsl,qoriq-tmu";
+	reg = <0xf0000 0x1000>;
+	interrupts = <18 2 0 0>;
+	calibration = <0x00000000 0x0000000f
+		       0x00000001 0x00000017
+		       0x00000002 0x0000001e
+		       0x00000003 0x00000026
+		       0x00000004 0x0000002e
+		       0x00000005 0x00000035
+		       0x00000006 0x0000003d
+		       0x00000007 0x00000044
+		       0x00000008 0x0000004c
+		       0x00000009 0x00000053
+		       0x0000000a 0x0000005b
+		       0x0000000b 0x00000062
+
+		       0x00010000 0x00000011
+		       0x00010001 0x00000019
+		       0x00010002 0x00000021
+		       0x00010003 0x0000002a
+		       0x00010004 0x00000032
+		       0x00010005 0x0000003a
+		       0x00010006 0x00000042
+		       0x00010007 0x0000004b
+		       0x00010008 0x00000053
+		       0x00010009 0x0000005b
+		       0x0001000a 0x00000063
+
+		       0x00020000 0x00000012
+		       0x00020001 0x0000001b
+		       0x00020002 0x00000024
+		       0x00020003 0x0000002c
+		       0x00020004 0x00000035
+		       0x00020005 0x0000003d
+		       0x00020006 0x00000046
+		       0x00020007 0x0000004e
+		       0x00020008 0x00000057
+
+		       0x00030000 0x00000009
+		       0x00030001 0x00000011
+		       0x00030002 0x00000019
+		       0x00030003 0x00000021
+		       0x00030004 0x00000029
+		       0x00030005 0x00000031
+		       0x00030006 0x00000039
+		       0x00030007 0x00000041>;
+};

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi

b/arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi
new file mode 100644
index 0000000..d85c77d

--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi

@@ -0,0 +1,82 @@
+/*
+ * QorIQ TMU device tree stub [ controller @ offset 0xf0000 ]
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions

are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
copyright
+ *       notice, this list of conditions and the following disclaimer in
the
+ *       documentation and/or other materials provided with the
distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote
products
+ *       derived from this software without specific prior written
permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of
the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND
ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR
ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+tmu@f0000 {
+	compatible = "fsl,qoriq-tmu";
+	reg = <0xf0000 0x1000>;
+	interrupts = <18 2 0 0>;
+	calibration = <0x00000000 0x0000000f
+		       0x00000001 0x00000017
+		       0x00000002 0x0000001e
+		       0x00000003 0x00000026
+		       0x00000004 0x0000002e
+		       0x00000005 0x00000035
+		       0x00000006 0x0000003d
+		       0x00000007 0x00000044
+		       0x00000008 0x0000004c
+		       0x00000009 0x00000053
+		       0x0000000a 0x0000005b
+		       0x0000000b 0x00000062
+
+		       0x00010000 0x00000011
+		       0x00010001 0x00000019
+		       0x00010002 0x00000021
+		       0x00010003 0x0000002a
+		       0x00010004 0x00000032
+		       0x00010005 0x0000003a
+		       0x00010006 0x00000042
+		       0x00010007 0x0000004b
+		       0x00010008 0x00000053
+		       0x00010009 0x0000005b
+		       0x0001000a 0x00000063
+
+		       0x00020000 0x00000012
+		       0x00020001 0x0000001b
+		       0x00020002 0x00000024
+		       0x00020003 0x0000002c
+		       0x00020004 0x00000035
+		       0x00020005 0x0000003d
+		       0x00020006 0x00000046
+		       0x00020007 0x0000004e
+		       0x00020008 0x00000057
+
+		       0x00030000 0x00000009
+		       0x00030001 0x00000011
+		       0x00030002 0x00000019
+		       0x00030003 0x00000021
+		       0x00030004 0x00000029
+		       0x00030005 0x00000031
+		       0x00030006 0x00000039
+		       0x00030007 0x00000041>;
+};

diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi

b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 15ae462..bb9f792 100644

--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi

@@ -345,6 +345,7 @@
 		reg	   = <0xea000 0x4000>;
 	};

+/include/ "qoriq-tmu-t104xsi.dtsi"
 /include/ "elo3-dma-0.dtsi"
 /include/ "elo3-dma-1.dtsi"
 /include/ "qoriq-espi-0.dtsi"
--

2.1.0.27.g96db324