Re: BCM2836 (Raspberry Pi 2) port

Stephen Warren [off-list ref] writes:

On 05/12/2015 09:39 AM, Alexander Stein wrote:

quoted

On Monday 11 May 2015, 20:36:40 wrote Stephen Warren:

quoted

On 05/08/2015 10:14 AM, Alexander Stein wrote:

quoted

On Thursday 23 April 2015, 22:25:08 wrote Stephen Warren:

quoted

quoted

Hit any key to stop autoboot:  0
U-Boot> setenv fdt_high fffffff

Any specific reason to set fdt_high to fffffff?

Yes, it prevents U-Boot's annoying habit of moving the DTB from where it
was loaded to some other place. This was especially important in this
case since I was trying to find out exactly which piece of RAM being
over-written caused the issues I was seeing.

Shouldn't this then be part of the default raspberry (2 only?) environment?

Eventually yes. So far, nobody seems to know which areas of RAM are 
off-limits (presumably since the RAM is used as a CPU1..3 pen), so I was 
experimenting to try and find that out.

If I'm reading this right, the CPU1-3 pen is in the bottom 8k of memory
(actually much less than 8k).