@@ -0,0 +1,46 @@
+Binding for Richtek rt9455 battery charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "richtek,rt9455"
+
+- reg:					integer, i2c address of the device.
+- richtek,output-charge-current:	integer, output current in uA, from the
+					charger to the battery.
+- richtek,end-of-charge-percentage:	integer, percent of the output charge current.
+					When the current in constant-voltage phase drops
+					below output_charge_current x end-of-charge-percentage,
+					charge is terminated.
+- richtek,battery-regulation-voltage:	integer, maximum battery voltage in uV.
+- richtek,boost-output-voltage:		integer, maximum voltage in uV, provided to consumer
+					devices, when the charger is in boost mode.
+
+Optional properties:
+- richtek,min-input-voltage-regulation: integer, input voltage threshold in uA, used to
+					determine when to decrease voltage level when
+					the over current of the input power source occurs.
+					This prevents input voltage drop due to insufficient
+					current provided by the power source.
+- richtek,avg-input-current-regulation: integer, input current in uA, the charger should
+					drain from the power source.
+
+Example:
+
+rt9455@22 {
+	compatible = "richtek,rt9455";
+	reg = <0x22>;
+
+	interrupt-parent = <&gpio1>;
+	interrupts = <0 1>;
+
+	interrupt-gpio = <&gpio1 0 1>;
+	reset-gpio = <&gpio1 1 1>;
+
+	richtek,output-charge-current	    = <500000>;
+	richtek,end-of-charge-percentage    = <10>;
+	richtek,battery-regulation-voltage  = <4200000>;
+	richtek,boost-output-voltage	    = <5050000>;
+
+	richtek,min-input-voltage-regulation = <4500000>;
+	richtek,avg-input-current-regulation = <500000>;
+};