Re: [PATCH] Show proper respect for Heinrich Hertz by using the correct unit for frequency

On Mon, May 11, 2015 at 11:39:08PM +0200, Andreas Färber wrote:

Am 11.05.2015 um 15:19 schrieb Russell King - ARM Linux:

quoted

The SI unit of frequency is Hertz, named after Heinrich Hertz, and is
given the symbol "Hz" to denote this.  "hz" is not the unit of frequency,
and is in fact meaningless.

Fix arch/arm to correctly use "Hz", thereby acknowledging Heinrich Hertz
contribution to the modern world.

Signed-off-by: Russell King <redacted>

Nice. :) Since you're being exact, should it be "Hertz' contribution"?

quoted

diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index f5b5a1d96cd7..53ae04f9104d 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts

@@ -66,7 +66,7 @@
 
 	otg_drv_vbus: pinmux_otg_drv_vbus {
 		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */

This one looks like an identifier - did you check where it comes from
and whether it needs to be fixed there as well?

There isn't any other reference to it in arch/arm (if there were, the
grep to find these would itself have found it.)

-- 
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.