[PATCH v3 2/5] Documentation: devicetree: add Broadcom SATA PHY binding
From: Brian Norris <computersforpeace@gmail.com>
Date: 2015-05-12 23:29:32
Also in:
linux-arm-kernel, linux-ide, lkml
Subsystem:
generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
For 28nm STB chips, based on BCM7445.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
v3: no change
v2:
- make each subnode into a provider, so we can use direct phandle references
to them
- drop the 'port-ctrl' register range, since this was shared with the SATA
node
.../bindings/phy/brcm,brcmstb-sata-phy.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
new file mode 100644
index 000000000000..7f81ef90146a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt@@ -0,0 +1,40 @@ +* Broadcom SATA3 PHY for STB + +Required properties: +- compatible: should be one or more of + "brcm,bcm7445-sata-phy" + "brcm,phy-sata3" +- address-cells: should be 1 +- size-cells: should be 0 +- reg: register range for the PHY PCB interface +- reg-names: should be "phy" + +Sub-nodes: + Each port's PHY should be represented as a sub-node. + +Sub-nodes required properties: +- reg: the PHY number +- phy-cells: generic PHY binding; must be 0 +Optional: +- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port + + +Example: + + sata-phy@f0458100 { + compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; + reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + + sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + };
--
1.9.1