[PATCH 2/3] ARM: at91/dt: sama5d3 add mmc0 vmmcq entry

The SAM5D3 Xplained device tree is missing hte vqmmc node which is
tied to 3.3V on the board. Add this to avoid the kernel warning that
there is no vqmmc node.

atmel_mci f0000000.mmc: No vqmmc regulator found

Signed-off-by: Ben Dooks <redacted>
--
CC: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
CC: Andrew Victor <redacted>
CC: Nicolas Ferre <redacted>
CC: Jean-Christophe Plagniol-Villard <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
CC: Rob Herring <redacted>
CC: Pawel Moll <redacted>
CC: Mark Rutland <redacted>
CC: Ian Campbell <redacted>
CC: Kumar Gala <redacted>
CC: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
CC: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
CC: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/arm/boot/dts/at91-sama5d3_xplained.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 652c4dd..1eb150d 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts

@@ -36,6 +36,7 @@
 			mmc0: mmc@f0000000 {
 				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
 				status = "okay";
+				vqmmc-supply = <&vcc_3v3_reg>;
 				slot@0 {
 					reg = <0>;
 					bus-width = <8>;

-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html