[PATCH] DT: leds: Add uniqueness requirement for 'label' property.
From: Jacek Anaszewski <hidden>
Date: 2015-03-26 14:03:09
Also in:
linux-leds
Subsystem:
led subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Label is used for naming LED class devices. Since ePAPR doesn't require uniqueness for label properties, it has to be explicitly required in the LEDs common bindings documentation. Signed-off-by: Jacek Anaszewski <redacted> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Bryan Wu <redacted> Cc: Richard Purdie <redacted> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: devicetree@vger.kernel.org --- Documentation/devicetree/bindings/leds/common.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 34811c5..747c538 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt@@ -14,8 +14,10 @@ Optional properties for child nodes: - led-sources : List of device current outputs the LED is connected to. The outputs are identified by the numbers that must be defined in the LED device binding documentation. -- label : The label for this LED. If omitted, the label is - taken from the node name (excluding the unit address). +- label : The label for this LED. If omitted, the label is taken from the node + name (excluding the unit address). It has to uniquely identify + a device, i.e. no other LED class device can be assigned the same + label. - linux,default-trigger : This parameter, if present, is a string defining the trigger assigned to the LED. Current triggers are:
--
1.7.9.5