[PATCH 1/4] extcon: usb-gpio: register extcon device before IRQ registration
From: Robert Baldyga <hidden>
Date: 2015-03-31 07:46:52
Also in:
lkml
Subsystem:
external connector subsystem (extcon), the rest · Maintainers:
MyungJoo Ham, Chanwoo Choi, Linus Torvalds
IRQ handler touches info->edev, so if interrupt occurs before extcon device initialization it can cause NULL pointer dereference. Doing extcon initialization before IRQ handler registration fixes this problem. Signed-off-by: Robert Baldyga <redacted> --- drivers/extcon/extcon-usb-gpio.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
index 3f0bad3..f6aa99d 100644
--- a/drivers/extcon/extcon-usb-gpio.c
+++ b/drivers/extcon/extcon-usb-gpio.c@@ -119,6 +119,18 @@ static int usb_extcon_probe(struct platform_device *pdev) return PTR_ERR(info->id_gpiod); } + info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + + ret = devm_extcon_dev_register(dev, info->edev); + if (ret < 0) { + dev_err(dev, "failed to register extcon device\n"); + return ret; + } + ret = gpiod_set_debounce(info->id_gpiod, USB_GPIO_DEBOUNCE_MS * 1000); if (ret < 0)
@@ -142,18 +154,6 @@ static int usb_extcon_probe(struct platform_device *pdev) return ret; } - info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable); - if (IS_ERR(info->edev)) { - dev_err(dev, "failed to allocate extcon device\n"); - return -ENOMEM; - } - - ret = devm_extcon_dev_register(dev, info->edev); - if (ret < 0) { - dev_err(dev, "failed to register extcon device\n"); - return ret; - } - platform_set_drvdata(pdev, info); device_init_wakeup(dev, 1);
--
1.9.1