Hi,

On Mon, Feb 02, 2015 at 09:51:34AM -0800, Dmitry Torokhov wrote:

On Mon, Feb 02, 2015 at 05:05:39PM +0100, Markus Pargmann wrote:

quoted

Hi,

On Fri, Jan 30, 2015 at 10:57:21AM -0800, Dmitry Torokhov wrote:

quoted

On Thu, Jan 29, 2015 at 07:56:40PM +0530, Varka Bhadram wrote:

quoted

Hi,

On Thursday 29 January 2015 07:39 PM, Markus Pargmann wrote:

quoted

This is a driver for the imx25 ADC/TSC module. It controls the
touchscreen conversion queue and creates a touchscreen input device.
The driver currently only supports 4 wire touchscreens. The driver uses
a simple conversion queue of precharge, touch detection, X measurement,
Y measurement, precharge and another touch detection.

This driver uses the regmap from the parent to setup some touch specific
settings in the core driver and setup a idle configuration with touch
detection.

Signed-off-by: Markus Pargmann <redacted>
Signed-off-by: Denis Carikli <redacted>
Acked-by: Dmitry Torokhov <redacted>
Signed-off-by: Markus Pargmann <redacted>
---
 drivers/input/touchscreen/Kconfig         |   6 +
 drivers/input/touchscreen/Makefile        |   1 +
 drivers/input/touchscreen/fsl-imx25-tcq.c | 587 ++++++++++++++++++++++++++++++
 3 files changed, 594 insertions(+)
 create mode 100644 drivers/input/touchscreen/fsl-imx25-tcq.c

(...)

quoted

+	ret = request_threaded_irq(priv->irq, mx25_tcq_irq, mx25_tcq_irq_thread,
+				   IRQF_ONESHOT, pdev->name, priv);

We can use devres API for request_thread_irq()...

quoted

+	if (ret) {
+		dev_err(dev, "Failed requesting IRQ\n");
+		goto err_clk_unprepare;
+	}
+
+	ret = mx25_tcq_init(priv);
+	if (ret) {
+		dev_err(dev, "Failed to init tcq\n");
+		goto error_free_irq;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+
+error_free_irq:
+	free_irq(priv->irq, priv);

This is not required if we use devres API

Yes it does - you do not really want to stop clocks in the middle of
servicing interrupt.

Thanks, I missed the clocks. I will not use devm here then.

Actually, you still can if you move clock enabling/disabling and
mx25_tcq_init() into input_dev->open() and ->close() callbacks. Close
will be called during input device un-registration which happens (given
your current sequence) after freeing irq by devm.

Thank you. I now moved that code into open() and close(), replaced the
irq_request() with devm_irq_request. mx25_tcq_remove() is gone now.

By the way, I used my old @vmware address by accident. Can you please
replace the original acked by with:

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Replaced it.

Thanks,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |