[PATCH 4/6] ARM: DT: STi: STiH407: Add dwc3 usb3 DT node.
From: Peter Griffin <peter.griffin@linaro.org>
Date: 2015-02-25 13:36:34
Also in:
linux-arm-kernel, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Now that both usb2 and usb3 phy drivers, and also the ST dwc3 glue code are all present upstream, we can add the dwc3 DT node and have a working usb3 controller on stih407-b2120 and stih410-b2020. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- arch/arm/boot/dts/stih407-family.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 186412d..18ff5a5 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi@@ -7,6 +7,7 @@ * publishhed by the Free Software Foundation. */ #include "stih407-pinctrl.dtsi" +#include <dt-bindings/phy/phy.h> #include <dt-bindings/reset-controller/stih407-resets.h> / { #address-cells = <1>;
@@ -336,5 +337,30 @@ resets = <&softreset STIH407_MIPHY2_SOFTRESET>; }; }; + + st_dwc3: dwc3@8f94000 { + compatible = "st,stih407-dwc3"; + reg = <0x08f94000 0x1000>, <0x110 0x4>; + reg-names = "reg-glue", "syscfg-reg"; + st,syscfg = <&syscfg_core>; + resets = <&powerdown STIH407_USB3_POWERDOWN>, + <&softreset STIH407_MIPHY2_SOFTRESET>; + reset-names = "powerdown", + "softreset"; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; + ranges; + + dwc3: dwc3@9900000 { + compatible = "snps,dwc3"; + reg = <0x09900000 0x100000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; + dr_mode = "host"; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy0>, <&phy_port2 PHY_TYPE_USB3>; + }; + }; }; };
--
1.9.1