[PATCH 08/12] ARM: DT: apq8064: Add USB OTG support for CM QS-600
From: Srinivas Kandagatla <hidden>
Date: 2015-02-23 07:56:00
Also in:
linux-arm-kernel, linux-arm-msm, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Nicolas Dechesne <redacted> This patch adds USB OTG support on USB1 for Compulab QS-600 Board. Signed-off-by: Nicolas Dechesne <redacted> --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index af2e075..6349f24 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts@@ -41,6 +41,11 @@ }; }; + /* OTG */ + usb1_phy:phy@12500000 { + status = "ok"; + }; + usb3_phy:phy@12520000 { status = "ok"; };
@@ -48,7 +53,16 @@ usb4_phy:phy@12530000 { status = "ok"; }; - + + gadget1:gadget@12500000 { + status = "ok"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "ok"; + }; + usb3: usb@12520000 { status = "ok"; };
--
1.9.1