Re: [v7,2/3] i2c: iproc: Add Broadcom iProc I2C Driver

On Fri, Feb 6, 2015 at 2:31 PM, Kevin Cernekee [off-list ref] wrote:

On Mon, Jan 19, 2015 at 01:51:49PM -0800, Ray Jui wrote:

quoted

+
+     dev_dbg(iproc_i2c->device, "xfer %c, addr=0x%02x, len=%d\n",
+             (msg->flags & I2C_M_RD) ? 'R' : 'W', msg->addr,
+             msg->len);
+     dev_dbg(iproc_i2c->device, "**** data start ****\n");
+     for (i = 0; i < msg->len; i++)
+             dev_dbg(iproc_i2c->device, "0x%02x ",  msg->buf[i]);
+     dev_dbg(iproc_i2c->device, "**** data end ****\n");

It might be simpler to just do:

    print_hex_dump_bytes("iproc_i2c:", DUMP_PREFIX_NONE, msg->buf, msg->len);

although you'd lose the ability to see the I2C device name.

We can also do:

dev_dbg(iproc_i2c->device, "*** data: %*ph\n", msg->len, msg->buf);

if we are OK with limiting output to 64 bytes.

Thanks,
Dmitry