Re: [PATCHv2] mvebu: add Linksys WRT1900AC (Mamba) support
From: Andrew Lunn <hidden>
Date: 2015-01-26 18:44:36
Also in:
linux-arm-kernel
On Mon, Jan 19, 2015 at 06:15:01PM +0100, Imre Kaloz wrote:
quoted hunk
The Linksys WRT1900AC (Mamba) is a router that has - 2 mini-PCIe slots with Marvell 88W8864 radios - 1 USB 3.0 port - 1 USB 2.0/eSATAp port - 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) - 128MB NAND flash - 256MB RAM Signed-off-by: Imre Kaloz <redacted> --- Changes since v1: * add dual license * lower SPI speed to meet the chip's maximum * pinctrl cleanups based on Andrew Lunn's suggestions --- arch/arm/boot/dts/armada-xp-mamba.dts | 273 ++++++++++++++++++++++++++++++++++ 1 file changed, 273 insertions(+) create mode 100644 arch/arm/boot/dts/armada-xp-mamba.dtsdiff --git a/arch/arm/boot/dts/armada-xp-mamba.dts b/arch/arm/boot/dts/armada-xp-mamba.dts new file mode 100644 index 0000000..e368d18 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mamba.dts@@ -0,0 +1,273 @@ +/* + * Device Tree file for the Linksys WRT1900AC (Mamba). + * + * Note: this board is shipped with a new generation boot loader that + * remaps internal registers at 0xf1000000. Therefore, if earlyprintk + * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be + * used. + * + * Copyright (C) 2014 Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> + * + * Based on armada-xp-axpwifiap.dts: + * + * Copyright (C) 2013 Marvell + * + * Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-xp-mv78230.dtsi" + +/ { + model = "Linksys WRT1900AC (Mamba)"; + compatible = "linksys,mamba", "marvell,armadaxp-mv78230", + "marvell,armadaxp", "marvell,armada-370-xp";
Hi Imre
So the consensus seems to be
model = "Linksys WRT1900AC";
compatible = "linksys,mamba", "...";
with leds using mamba.
Please name the file armada-xp-linksys-mamba.dts.
Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html