Other drivers are following the following compatible string format for dts:
s/_/-/
Because some devices may still use the previous string, the new corrected
string is added to the of_device_id table.
Signed-off-by: Christophe Ricard <redacted>
---
Documentation/devicetree/bindings/net/nfc/st21nfca.txt | 4 ++--
drivers/nfc/st21nfca/i2c.c | 1 +
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
index e4faa2e..db677fe 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
@@ -1,7 +1,7 @@
* STMicroelectronics SAS. ST21NFCA NFC Controller
Required properties:
-- compatible: Should be "st,st21nfca_i2c".
+- compatible: Should be "st,st21nfca-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
- interrupt-parent: phandle for the interrupt gpio controller
@@ -20,7 +20,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
st21nfca: st21nfca@1 {
- compatible = "st,st21nfca_i2c";
+ compatible = "st,st21nfca-i2c";
reg = <0x01>;
clock-frequency = <400000>;diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c
index 0572208..b2e0792 100644
--- a/drivers/nfc/st21nfca/i2c.c
+++ b/drivers/nfc/st21nfca/i2c.c
@@ -661,6 +661,7 @@ static int st21nfca_hci_i2c_remove(struct i2c_client *client)
#ifdef CONFIG_OF
static const struct of_device_id of_st21nfca_i2c_match[] = {
+ { .compatible = "st,st21nfca-i2c", },
{ .compatible = "st,st21nfca_i2c", },
{}
};--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html