RE: [PATCH V9 13/14] ARM: dts: snow: represent the connection between bridge and panel using videoport and endpoints

Define videoports and use endpoints to describe the connection between
the encoder, bridge and the panel, instead of using phandles.

Signed-off-by: Ajay Kumar <redacted>
Acked-by: Inki Dae <redacted>
Tested-by: Rahul Sharma <redacted>
Tested-by: Javier Martinez Canillas <javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Tested-by: Gustavo Padovan <gustavo.padovan-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Tested-by: Sjoerd Simons <sjoerd.simons-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
---
 arch/arm/boot/dts/exynos5250-snow.dts |   30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index b9aeec4..1bd5d3a 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts

@@ -183,7 +183,20 @@
 			powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
 			reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
 			edid-emulation = <5>;
-			panel = <&panel>;
+
+			ports {
+				port@0 {
+					bridge_out: endpoint {
+						remote-endpoint = <&panel_in>;
+					};
+				};
+
+				port@1 {
+					bridge_in: endpoint {
+						remote-endpoint = <&dp_out>;
+					};
+				};
+			};
 		};
 	};

@@ -228,6 +241,12 @@
 		compatible = "auo,b116xw03";
 		power-supply = <&fet6>;
 		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
 	};
 };

@@ -242,7 +261,14 @@
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <2>;
 	samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
-	bridge = <&ptn3460>;
+
+	ports {
+		port@0 {
+			dp_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
 };

 &ehci {
--

1.7.9.5