Re: [PATCH 4/4] ARM: mvebu: add Device Tree description of RTC on Armada 38x
From: Gregory CLEMENT <hidden>
Date: 2015-01-14 08:38:22
Also in:
linux-arm-kernel
Hi Arnaud, On 14/01/2015 00:03, Arnaud Ebalard wrote:
Hi Gregory, Gregory CLEMENT [off-list ref] writes:quoted
The Marvell Armada 38x SoCs contains an RTC which differs from the RTC used in the other mvebu SoCs until now. This commit adds the Device Tree description of this interface at the SoC level. Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> --- arch/arm/boot/dts/armada-38x.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 04fe80d101f8..22909add8889 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi@@ -466,6 +466,12 @@ clocks = <&gateclk 4>; }; + rtc@184a8 { + compatible = "marvell,armada-380-rtc"; + reg = <0xa3800 0x20>, <0x184a0 0x0c>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + }; +Out of curiosity, why not naming the node rtc@a3800? Main argument: least expectation principle when reading the .dtsi and expecting increasing addresses. Or did I miss sth else?
It was a mistake, I should have used the 0xa3800 offset to name it because most of the RTC registers are located here. Thanks, Gregory
quoted
sata@a8000 { compatible = "marvell,armada-380-ahci"; reg = <0xa8000 0x2000>;
-- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html