Re: [PATCH V2 1/2] DT: mxs-lradc: fix ranges of ts properties
From: Jonathan Cameron <hidden>
Date: 2015-01-04 11:14:38
Also in:
linux-iio
On 29/12/14 10:27, Stefan Wahren wrote:
This patch fixes off-by-one issues in the devicetree binding of mxs-lradc. According to the i.MX23 and i.MX28 reference manuals [1][2] the range of NUM_SAMPLES is 0..31, but property ave-ctrl is substracted by 1 before used. Considering all limitations the range of DELAY is 1..2047, but also property ave-delay is substracted by 1 before used. The patch has been suggested by Hartmut Knaack and Kristina Martsenko. [1] - http://cache.freescale.com/files/dsp/doc/ref_manual/IMX23RM.pdf [2] - http://cache.freescale.com/files/dsp/doc/ref_manual/MCIMX28RM.pdf Signed-off-by: Stefan Wahren <redacted>
Hmm. I debated whether to take these through the fixes tree. Whilst they are technically fixing the driver, it is only a fashion that makes it a little more flexible and the devicetree binding more resilient. Good stuff, but can probably wait a cycle. Anyhow, as such - applied to the togreg branch of iio.git. Initially pushed out as testing for the autobuilders to play. Thanks, Jonathan
quoted hunk
--- .../bindings/staging/iio/adc/mxs-lradc.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt index ee05dc3..3075377 100644 --- a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt +++ b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt@@ -12,9 +12,9 @@ Optional properties: property is not present, then the touchscreen is disabled. 5 wires is valid for i.MX28 SoC only. - fsl,ave-ctrl: number of samples per direction to calculate an average value. - Allowed value is 1 ... 31, default is 4 + Allowed value is 1 ... 32, default is 4 - fsl,ave-delay: delay between consecutive samples. Allowed value is - 1 ... 2047. It is used if 'fsl,ave-ctrl' > 1, counts at + 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at 2 kHz and its default is 2 (= 1 ms) - fsl,settling: delay between plate switch to next sample. Allowed value is 1 ... 2047. It counts at 2 kHz and its default is