Hi Linus,

I rebased my branch onto your current pinctrl/devel. Other than that
this should be exactly what has been sent out as v3. This time I'll use
the gmail SMTP again, which hopefully resolves the encoding issue.

	Thanks,
	Sören

Soren Brinkmann (7):
  pinctrl: pinconf-generic: Infer map type from DT property
  pinctrl: pinconf-generic: Allow driver to specify DT params
  pinctrl: zynq: Document DT binding
  pinctrl: Add driver for Zynq
  ARM: zynq: Enable pinctrl
  ARM: zynq: DT: Add pinctrl information
  pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic

 .../bindings/pinctrl/xlnx,zynq-pinctrl.txt         |  104 ++
 arch/arm/boot/dts/zynq-7000.dtsi                   |    8 +-
 arch/arm/boot/dts/zynq-zc702.dts                   |  181 +++
 arch/arm/boot/dts/zynq-zc706.dts                   |  152 +++
 arch/arm/mach-zynq/Kconfig                         |    2 +
 drivers/pinctrl/Kconfig                            |    8 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/nomadik/pinctrl-abx500.c           |    2 +-
 drivers/pinctrl/pinconf-generic.c                  |  199 ++--
 drivers/pinctrl/pinconf.c                          |    4 +-
 drivers/pinctrl/pinconf.h                          |   22 +-
 drivers/pinctrl/pinctrl-rockchip.c                 |    2 +-
 drivers/pinctrl/pinctrl-tz1090-pdc.c               |    2 +-
 drivers/pinctrl/pinctrl-tz1090.c                   |    2 +-
 drivers/pinctrl/pinctrl-zynq.c                     | 1176 ++++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c           |  125 +--
 drivers/pinctrl/sh-pfc/pinctrl.c                   |    2 +-
 include/linux/pinctrl/pinconf-generic.h            |   29 +
 include/linux/pinctrl/pinctrl.h                    |    9 +
 19 files changed, 1808 insertions(+), 222 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-zynq.c

-- 
2.2.1.1.gb42cc81