The whole series is
Acked-by: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

On 19/12/2014 at 09:51:37 +0100, Alexander Stein wrote :

This is based on and requires Boris' work on an EBI driver for AT91. Please
refer to https://lkml.org/lkml/2014/12/3/806.
The reason I added no pinctrl is that those pins from EBI1 in my case are not
muxable. They are fixed so there is nothing I can test here.
I used this patchset and the EBI to configure a PSRAM to be used by the
atmel_lcdfb driver which works so far.
This also means EBI0 is rather untested, but it should behave like EBI1 if
the numbers are correct.

Best regards,
Alexander

Alexander Stein (3):
  ARM: at91/dt: add matrix node in at91sam9263 dtsi
  ARM: at91/dt: add SMC0/1  nodes in at91sam9263 dtsi
  ARM: at91/dt: add EBI (External Bus Interface) node in at91sam9263
    dtsi

 arch/arm/boot/dts/at91sam9263.dtsi | 44 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

-- 
2.2.1

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html