[PATCH RFC v2 09/14] drm: panel: Add support for Himax HX8369A MIPI DSI panel
From: Liu Ying <hidden>
Date: 2014-12-18 07:09:53
Also in:
dri-devel, linux-arm-kernel, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm panel drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Neil Armstrong, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This patch adds support for Himax HX8369A MIPI DSI panel. Signed-off-by: Liu Ying <redacted> --- v1->v2: * Address almost all comments from Thierry Reding. * Remove several DT properties as they can be implied by the compatible string. * Add the HIMAX/himax prefixes to the driver's Kconfig name and driver name. * Move the driver's Makefile entry place to sort the entries alphabetically. * Reuse several standard DCS functions instead of inventing wheels. * Move the panel resetting and power logics to the driver probe/remove stages. This may simplify panel prepare/unprepare hooks. The power consumption should not change a lot at DPMS since the panel enters sleep mode at that time. * Add the module author. * Other minor changes, such as coding style issues. .../devicetree/bindings/panel/himax,hx8369a.txt | 41 ++ drivers/gpu/drm/panel/Kconfig | 5 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-himax-hx8369a.c | 573 +++++++++++++++++++++ 4 files changed, 620 insertions(+) create mode 100644 Documentation/devicetree/bindings/panel/himax,hx8369a.txt create mode 100644 drivers/gpu/drm/panel/panel-himax-hx8369a.c
diff --git a/Documentation/devicetree/bindings/panel/himax,hx8369a.txt b/Documentation/devicetree/bindings/panel/himax,hx8369a.txt
new file mode 100644
index 0000000..36a2f11
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/himax,hx8369a.txt@@ -0,0 +1,41 @@ +Himax HX8369A WVGA 16.7M color TFT single chip driver with internal GRAM + +Himax HX8369A is a WVGA resolution driving controller. +It is designed to provide a single chip solution that combines a source +driver and power supply circuits to drive a TFT dot matrix LCD with +480RGBx864 dots at the maximum. + +The HX8369A supports several interface modes, including MPU MIPI DBI Type +A/B mode, MIPI DPI/DBI Type C mode, MIPI DSI video mode, MIPI DSI command +mode and MDDI mode. The interface mode is selected by the external hardware +pins BS[3:0]. + +Currently, only the MIPI DSI video mode is supported. + +Required properties: + - compatible: should be a panel's compatible string + - reg: the virtual channel number of a DSI peripheral as described in [1] + - reset-gpios: a GPIO spec for the reset pin + +Optional properties: + - vdd1-supply: I/O and interface power supply + - vdd2-supply: analog power supply + - vdd3-supply: logic power supply + - dsi-vcc-supply: DSI and MDDI power supply + - vpp-supply: OTP programming voltage + - bs0-gpios: a GPIO spec for the pin BS0 + - bs1-gpios: a GPIO spec for the pin BS1 + - bs2-gpios: a GPIO spec for the pin BS2 + - bs3-gpios: a GPIO spec for the pin BS3 + +[1] Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt + +Example: + panel { + compatible = "truly,tft480800-16-e-dsi"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_panel>; + reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + bs2-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; + };
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 024e98e..81b0bf0 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig@@ -16,6 +16,11 @@ config DRM_PANEL_SIMPLE that it can be automatically turned off when the panel goes into a low power state. +config DRM_PANEL_HIMAX_HX8369A + tristate "Himax HX8369A panel" + depends on OF + select DRM_MIPI_DSI + config DRM_PANEL_LD9040 tristate "LD9040 RGB/SPI panel" depends on OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 4b2a043..d5dbe06 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile@@ -1,4 +1,5 @@ obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o +obj-$(CONFIG_DRM_PANEL_HIMAX_HX8369A) += panel-himax-hx8369a.o obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
diff --git a/drivers/gpu/drm/panel/panel-himax-hx8369a.c b/drivers/gpu/drm/panel/panel-himax-hx8369a.c
new file mode 100644
index 0000000..ae783f2
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-himax-hx8369a.c@@ -0,0 +1,573 @@ +/* + * Himax HX8369A panel driver. + * + * Copyright (C) 2011-2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver is based on Samsung s6e8aa0 panel driver. + */ + +#include <drm/drmP.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> + +#include <video/mipi_display.h> +#include <linux/of_device.h> +#include <video/of_videomode.h> +#include <video/videomode.h> + +#define WRDISBV 0x51 +#define WRCTRLD 0x53 +#define WRCABC 0x55 +#define SETPOWER 0xb1 +#define SETDISP 0xb2 +#define SETCYC 0xb4 +#define SETVCOM 0xb6 +#define SETEXTC 0xb9 +#define SETMIPI 0xba +#define SETPANEL 0xcc +#define SETGIP 0xd5 +#define SETGAMMA 0xe0 + +#define HX8369A_MIN_BRIGHTNESS 0x00 +#define HX8369A_MAX_BRIGHTNESS 0xff + +enum hx8369a_mpu_interface { + HX8369A_DBI_TYPE_A_8BIT, + HX8369A_DBI_TYPE_A_9BIT, + HX8369A_DBI_TYPE_A_16BIT, + HX8369A_DBI_TYPE_A_18BIT, + HX8369A_DBI_TYPE_B_8BIT, + HX8369A_DBI_TYPE_B_9BIT, + HX8369A_DBI_TYPE_B_16BIT, + HX8369A_DBI_TYPE_B_18BIT, + HX8369A_DSI_CMD_MODE, + HX8369A_DBI_TYPE_B_24BIT, + HX8369A_DSI_VIDEO_MODE, + HX8369A_MDDI, + HX8369A_DPI_DBI_TYPE_C_OPT1, + HX8369A_DPI_DBI_TYPE_C_OPT2, + HX8369A_DPI_DBI_TYPE_C_OPT3 +}; + +enum hx8369a_resolution { + HX8369A_RES_480_864, + HX8369A_RES_480_854, + HX8369A_RES_480_800, + HX8369A_RES_480_640, + HX8369A_RES_360_640, + HX8369A_RES_480_720, +}; + +struct hx8369a_panel_desc { + const struct drm_display_mode *mode; + + /* ms */ + unsigned int power_on_delay; + unsigned int reset_delay; + + unsigned int dsi_lanes; +}; + +struct hx8369a { + struct device *dev; + struct drm_panel panel; + + const struct hx8369a_panel_desc *pd; + + struct regulator_bulk_data supplies[5]; + struct gpio_desc *reset_gpio; + struct gpio_desc *bs_gpio[4]; + u8 res_sel; +}; + +static inline struct hx8369a *panel_to_hx8369a(struct drm_panel *panel) +{ + return container_of(panel, struct hx8369a, panel); +} + +static void hx8369a_dcs_write(struct hx8369a *ctx, const char *func, + const void *data, size_t len) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + ssize_t ret; + + ret = mipi_dsi_dcs_write_buffer(dsi, data, len); + if (ret < 0) + dev_err(ctx->dev, "%s failed: %d\n", func, ret); +} + +#define hx8369a_dcs_write_seq(ctx, seq...) \ +({ \ + const u8 d[] = { seq }; \ + BUILD_BUG_ON_MSG(ARRAY_SIZE(d) > 64, "DCS sequence too big for stack"); \ + hx8369a_dcs_write(ctx, __func__, d, ARRAY_SIZE(d)); \ +}) + +#define hx8369a_dcs_write_seq_static(ctx, seq...) \ +({ \ + static const u8 d[] = { seq }; \ + hx8369a_dcs_write(ctx, __func__, d, ARRAY_SIZE(d)); \ +}) + +static void hx8369a_dsi_set_display_related_register(struct hx8369a *ctx) +{ + u8 sec_p = (ctx->res_sel << 4) | 0x03; + + hx8369a_dcs_write_seq(ctx, SETDISP, 0x00, sec_p, 0x03, + 0x03, 0x70, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x03, 0x00, 0x01); +} + +static void hx8369a_dsi_set_display_waveform_cycle(struct hx8369a *ctx) +{ + hx8369a_dcs_write_seq_static(ctx, SETCYC, 0x00, 0x1d, 0x5f, 0x0e, 0x06); +} + +static void hx8369a_dsi_set_gip(struct hx8369a *ctx) +{ + hx8369a_dcs_write_seq_static(ctx, SETGIP, 0x00, 0x04, 0x03, 0x00, 0x01, + 0x05, 0x1c, 0x70, 0x01, 0x03, 0x00, 0x00, 0x40, + 0x06, 0x51, 0x07, 0x00, 0x00, 0x41, 0x06, 0x50, + 0x07, 0x07, 0x0f, 0x04); +} + +static void hx8369a_dsi_set_power(struct hx8369a *ctx) +{ + hx8369a_dcs_write_seq_static(ctx, SETPOWER, 0x01, 0x00, 0x34, 0x06, 0x00, + 0x0f, 0x0f, 0x2a, 0x32, 0x3f, 0x3f, 0x07, 0x3a, + 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6); +} + +static void hx8369a_dsi_set_vcom_voltage(struct hx8369a *ctx) +{ + hx8369a_dcs_write_seq_static(ctx, SETVCOM, 0x56, 0x56); +} + +static void hx8369a_dsi_set_panel(struct hx8369a *ctx) +{ + hx8369a_dcs_write_seq_static(ctx, SETPANEL, 0x02); +} + +static void hx8369a_dsi_set_gamma_curve(struct hx8369a *ctx) +{ + hx8369a_dcs_write_seq_static(ctx, SETGAMMA, 0x00, 0x1d, 0x22, 0x38, 0x3d, + 0x3f, 0x2e, 0x4a, 0x06, 0x0d, 0x0f, 0x13, 0x15, + 0x13, 0x16, 0x10, 0x19, 0x00, 0x1d, 0x22, 0x38, + 0x3d, 0x3f, 0x2e, 0x4a, 0x06, 0x0d, 0x0f, 0x13, + 0x15, 0x13, 0x16, 0x10, 0x19); +} + +static void hx8369a_dsi_set_mipi(struct hx8369a *ctx) +{ + u8 eleventh_p = ctx->pd->dsi_lanes == 2 ? 0x11 : 0x10; + + hx8369a_dcs_write_seq(ctx, SETMIPI, 0x00, 0xa0, 0xc6, 0x00, 0x0a, 0x00, + 0x10, 0x30, 0x6f, 0x02, eleventh_p, 0x18, 0x40); +} + +static void hx8369a_dsi_set_interface_pixel_fomat(struct hx8369a *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + u8 format; + int ret; + + if (dsi->format == MIPI_DSI_FMT_RGB888) + format = 0x77; + else if (dsi->format == MIPI_DSI_FMT_RGB565) + format = 0x55; + else + format = 0x66; + + ret = mipi_dsi_dcs_set_pixel_format(dsi, format); + if (ret < 0) + dev_err(ctx->dev, "%s failed: %d\n", __func__, ret); +} + +static void hx8369a_dsi_set_column_address(struct hx8369a *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + const struct drm_display_mode *mode = ctx->pd->mode; + int ret; + + ret = mipi_dsi_dcs_set_column_address(dsi, 0, mode->hdisplay - 1); + if (ret < 0) + dev_err(ctx->dev, "%s failed: %d\n", __func__, ret); +} + +static void hx8369a_dsi_set_page_address(struct hx8369a *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + const struct drm_display_mode *mode = ctx->pd->mode; + int ret; + + ret = mipi_dsi_dcs_set_page_address(dsi, 0, mode->vdisplay - 1); + if (ret < 0) + dev_err(ctx->dev, "%s failed: %d\n", __func__, ret); +} + +static void hx8369a_dsi_write_display_brightness(struct hx8369a *ctx, u8 brightness) +{ + hx8369a_dcs_write_seq(ctx, WRDISBV, brightness); +} + +static void hx8369a_dsi_write_cabc(struct hx8369a *ctx) +{ + hx8369a_dcs_write_seq_static(ctx, WRCABC, 0x01); +} + +static void hx8369a_dsi_write_control_display(struct hx8369a *ctx) +{ + hx8369a_dcs_write_seq_static(ctx, WRCTRLD, 0x24); +} + +static void hx8369a_dsi_panel_init(struct hx8369a *ctx) +{ + hx8369a_dsi_set_display_related_register(ctx); + hx8369a_dsi_set_display_waveform_cycle(ctx); + hx8369a_dsi_set_gip(ctx); + hx8369a_dsi_set_power(ctx); + hx8369a_dsi_set_vcom_voltage(ctx); + hx8369a_dsi_set_panel(ctx); + hx8369a_dsi_set_gamma_curve(ctx); + hx8369a_dsi_set_mipi(ctx); + hx8369a_dsi_set_interface_pixel_fomat(ctx); + hx8369a_dsi_set_column_address(ctx); + hx8369a_dsi_set_page_address(ctx); + hx8369a_dsi_write_cabc(ctx); + hx8369a_dsi_write_control_display(ctx); +} + +static void hx8369a_dsi_set_extension_command(struct hx8369a *ctx) +{ + hx8369a_dcs_write_seq_static(ctx, SETEXTC, 0xff, 0x83, 0x69); +} + +static void hx8369a_dsi_set_maximum_return_packet_size(struct hx8369a *ctx, + u16 size) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + ret = mipi_dsi_set_maximum_return_packet_size(dsi, size); + if (ret < 0) + dev_err(ctx->dev, + "error %d setting maximum return packet size to %d\n", + ret, size); +} + +static int hx8369a_dsi_set_sequence(struct hx8369a *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + hx8369a_dsi_set_extension_command(ctx); + hx8369a_dsi_set_maximum_return_packet_size(ctx, 4); + hx8369a_dsi_panel_init(ctx); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + dev_err(ctx->dev, "failed to exit sleep mode: %d\n", ret); + return ret; + } + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + dev_err(ctx->dev, "failed to set display on: %d\n", ret); + return ret; + } + + /* + * It's necessary to wait 120msec after sending the Sleep Out + * command before Sleep In command can be sent, according to + * the HX8369A data sheet. + */ + msleep(120); + + return 0; +} + +static int hx8369a_dsi_disable(struct drm_panel *panel) +{ + struct hx8369a *ctx = panel_to_hx8369a(panel); + hx8369a_dsi_write_display_brightness(ctx, HX8369A_MIN_BRIGHTNESS); + return 0; +} + +static int hx8369a_dsi_unprepare(struct drm_panel *panel) +{ + struct hx8369a *ctx = panel_to_hx8369a(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) { + dev_err(ctx->dev, "failed to enter sleep mode: %d\n", ret); + return ret; + } + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) { + dev_err(ctx->dev, "failed to set display off: %d\n", ret); + return ret; + } + + /* + * This is to allow time for the supply voltages and clock + * circuits to stablize, according to the HX8369A data sheet. + */ + msleep(5); + + return ret; +} + +static int hx8369a_dsi_prepare(struct drm_panel *panel) +{ + struct hx8369a *ctx = panel_to_hx8369a(panel); + return hx8369a_dsi_set_sequence(ctx); +} + +static int hx8369a_dsi_enable(struct drm_panel *panel) +{ + struct hx8369a *ctx = panel_to_hx8369a(panel); + hx8369a_dsi_write_display_brightness(ctx, HX8369A_MAX_BRIGHTNESS); + return 0; +} + +static int hx8369a_get_modes(struct drm_panel *panel) +{ + struct drm_connector *connector = panel->connector; + struct drm_device *drm = panel->drm; + struct hx8369a *ctx = panel_to_hx8369a(panel); + struct drm_display_mode *mode; + const struct drm_display_mode *m = ctx->pd->mode; + + mode = drm_mode_duplicate(drm, m); + if (!mode) { + dev_err(drm->dev, "failed to add mode %ux%u@%u\n", + m->hdisplay, m->vdisplay, m->vrefresh); + return 0; + } + + drm_mode_set_name(mode); + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + + connector->display_info.bpc = 8; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs hx8369a_dsi_drm_funcs = { + .disable = hx8369a_dsi_disable, + .unprepare = hx8369a_dsi_unprepare, + .prepare = hx8369a_dsi_prepare, + .enable = hx8369a_dsi_enable, + .get_modes = hx8369a_get_modes, +}; + +static int hx8369a_power_on(struct hx8369a *ctx) +{ + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + if (ret < 0) + return ret; + + msleep(ctx->pd->power_on_delay); + + gpiod_set_value(ctx->reset_gpio, 1); + usleep_range(50, 60); + gpiod_set_value(ctx->reset_gpio, 0); + + msleep(ctx->pd->reset_delay); + + return 0; +} + +static int hx8369a_power_off(struct hx8369a *ctx) +{ + return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);; +} + +static int hx8369a_vm_to_res_sel(struct hx8369a *ctx) +{ + const struct drm_display_mode *mode = ctx->pd->mode; + + switch (mode->hdisplay) { + case 480: + switch (mode->vdisplay) { + case 864: + ctx->res_sel = HX8369A_RES_480_864; + break; + case 854: + ctx->res_sel = HX8369A_RES_480_854; + break; + case 800: + ctx->res_sel = HX8369A_RES_480_800; + break; + case 640: + ctx->res_sel = HX8369A_RES_480_640; + break; + case 720: + ctx->res_sel = HX8369A_RES_480_720; + break; + default: + break; + } + break; + case 360: + if (mode->vdisplay == 640) + ctx->res_sel = HX8369A_RES_360_640; + break; + default: + break; + } + + return 0; +} + +static const struct drm_display_mode truly_tft480800_16_e_mode = { + .clock = 26400, + .hdisplay = 480, + .hsync_start = 480 + 8, + .hsync_end = 480 + 8 + 8, + .htotal = 480 + 8 + 8 + 8, + .vdisplay = 800, + .vsync_start = 800 + 6, + .vsync_end = 800 + 6 + 6, + .vtotal = 800 + 6 + 6 + 6, + .vrefresh = 60, + .width_mm = 45, + .height_mm = 76, +}; + +static const struct hx8369a_panel_desc truly_tft480800_16_e_dsi = { + .mode = &truly_tft480800_16_e_mode, + .power_on_delay = 10, + .reset_delay = 10, + .dsi_lanes = 2, +}; + +static const struct of_device_id hx8369a_dsi_of_match[] = { + { + .compatible = "truly,tft480800-16-e-dsi", + .data = &truly_tft480800_16_e_dsi, + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, hx8369a_dsi_of_match); + +static int hx8369a_dsi_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + const struct of_device_id *of_id = + of_match_device(hx8369a_dsi_of_match, dev); + struct hx8369a *ctx; + int ret, i; + char bs[4]; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->dev = dev; + + if (of_id) { + ctx->pd = of_id->data; + } else { + dev_err(dev, "cannot find compatible device\n"); + return -ENODEV; + } + + ret = hx8369a_vm_to_res_sel(ctx); + if (ret < 0) + return ret; + + ctx->supplies[0].supply = "vdd1"; + ctx->supplies[1].supply = "vdd2"; + ctx->supplies[2].supply = "vdd3"; + ctx->supplies[3].supply = "dsi-vcc"; + ctx->supplies[4].supply = "vpp"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), + ctx->supplies); + if (ret < 0) { + dev_err(dev, "failed to get regulators: %d\n", ret); + return ret; + } + + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset_gpio)) { + dev_err(dev, "cannot get reset-gpios %ld\n", + PTR_ERR(ctx->reset_gpio)); + return PTR_ERR(ctx->reset_gpio); + } + + for (i = 0; i < 4; i++) { + snprintf(bs, sizeof(bs), "bs%d", i); + ctx->bs_gpio[i] = devm_gpiod_get(dev, bs, GPIOD_OUT_HIGH); + + dev_dbg(dev, "bs%d-gpio is configured\n", i); + } + + ret = hx8369a_power_on(ctx); + if (ret < 0) { + dev_err(dev, "cannot power on\n"); + return ret; + } + + drm_panel_init(&ctx->panel); + ctx->panel.dev = dev; + ctx->panel.funcs = &hx8369a_dsi_drm_funcs; + + ret = drm_panel_add(&ctx->panel); + if (ret < 0) + return ret; + + mipi_dsi_set_drvdata(dsi, ctx); + + dsi->channel = 0; + dsi->lanes = ctx->pd->dsi_lanes; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + ret = mipi_dsi_attach(dsi); + if (ret < 0) + drm_panel_remove(&ctx->panel); + + return ret; +} + +static int hx8369a_dsi_remove(struct mipi_dsi_device *dsi) +{ + struct hx8369a *ctx = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); + return hx8369a_power_off(ctx); +} + +static struct mipi_dsi_driver hx8369a_dsi_driver = { + .probe = hx8369a_dsi_probe, + .remove = hx8369a_dsi_remove, + .driver = { + .name = "panel-hx8369a-dsi", + .of_match_table = hx8369a_dsi_of_match, + }, +}; +module_mipi_dsi_driver(hx8369a_dsi_driver); + +MODULE_DESCRIPTION("Himax HX8369A panel driver"); +MODULE_AUTHOR("Liu Ying <Ying.Liu@freescale.com>"); +MODULE_LICENSE("GPL v2");
--
2.1.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel