On Tue, Dec 16, 2014 at 08:46:55AM +0000, Eddie Huang wrote:

Hi,

On Mon, 2014-12-15 at 12:59 +0000, Mark Rutland wrote:

quoted

On Fri, Dec 12, 2014 at 08:08:25AM +0000, Eddie Huang wrote:

quoted

Hi Mark,

On Thu, 2014-12-11 at 18:02 +0000, Mark Rutland wrote:

quoted

Hi,

On Wed, Dec 10, 2014 at 10:50:01AM +0000, Eddie Huang wrote:

quoted

Add device tree support for MT8173 SoC and evalutaion board based on it.

quoted

quoted

+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};

What are you using as your PSCI 0.2 implementation?

Is it fully compliant? (e.g. are the reset and power off functions
implemented, may CPU0 be hotplugged)?

Given only portions of the GIC seem to be described below, what
exception level is your kernel entered at? Per the spec it should be
EL2, but given the brokenness below with the GIC I'm suspicious.

Currently we only implement CPU boot, no power off, no CPU0 hotplug
either. And enter kernel at EL2. Actually, we run ATF in EL3, then
switch to EL2 to run lk and kernel.

Ok. In the absence of CPU_OFF, this is not yet a conforming PSCI 0.2
implementation, so I'm wary of marking this as PSCI 0.2 until that is
the case. Any attempt to power of CPUs will hit a BUG() in cpu_die(),
and we don't want that.

We are still developing PSCI related functions, CPU_ON, CPU_OFF,
CPU_SUSPEND are ready, others are going. PSCI 0.2 is our target although
lacks some implements

Ok. It sounds like for now you can describe this with PSCI 0.1 with
those functions implemented.

quoted

Is CPU0 hotplug planned?

No

In that case, for PSCI 0.1 you won't be able to have an enable-method of
"psci" for CPU0 (and hence won't get CPU_SUSPEND for the moment).

quoted

If not, does your PSCI implementation report CPU0 as
non-hotpluggable via MIGRATE_INFO_TYPE reporting a UP not migratable
trusted OS (and MIGRATE_INFO_UP_CPU reporting CPU0 as the resident CPU)?

Will check whether add this

For PSCI 0.2 you will need to implement these if Cthere is no CPU0
hotplug. Luckily they will only need to return constant values so this
should be easy.

We still need to implement the relevant logic in the Linux PSCI client
code for this, but that should be small and self-contained.

quoted

Are SYSTEM_OFF and SYSTEM_RESET available?

No yet

Ok.

quoted

Thanks,
Mark.

Since we miss some PSCI-0.2 implements, I don't know whether I should
remove PSCI stuff in this patch.

For the moment you will have to remove the PSCI 0.2 parts, as you are
not compliant and it's trivial to break the kernel on such a
configuration. You might get away with claiming PSCI 0.1, without an
enable method on CPU0, but this will come with reduced functionality.

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html