Thread (9 messages) 9 messages, 3 authors, 2015-03-17
STALE4125d
Revisions (6)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 current
  6. v6 [diff vs current]

[PATCH v5 1/3] of: Add binding for NVIDIA Tegra ACTMON node

From: Tomeu Vizoso <hidden>
Date: 2014-12-16 08:42:10
Also in: linux-pm, linux-tegra, lkml
Subsystem: open firmware and flattened device tree bindings, the rest · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

This block gathers statistics about various counters and can be configured to
fire interrupts when thresholds are crossed.

Signed-off-by: Tomeu Vizoso <redacted>

---

v2:	* Add operating-points property
---
 .../devicetree/bindings/arm/tegra/actmon.txt       | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/tegra/actmon.txt
diff --git a/Documentation/devicetree/bindings/arm/tegra/actmon.txt b/Documentation/devicetree/bindings/arm/tegra/actmon.txt
new file mode 100644
index 0000000..b4069df
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/actmon.txt
@@ -0,0 +1,38 @@
+Tegra124 Activity Monitor driver
+
+Required properties:
+
+- compatible: should be "nvidia,tegra124-actmon"
+- reg: offset and length of the register set for the device
+- interrupts: standard interrupt property
+- clocks: Must contain a phandle and clock specifier pair for each entry in clock-names. See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - actmon
+  - emc
+- resets: Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - actmon
+- operating-points: Supported operating points. See ../power/opp.txt for details.
+
+Example:
+	actmon@6000c800 {
+		compatible = "nvidia,tegra124-actmon";
+		reg = <0x0 0x6000c800 0x0 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
+			 <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car 119>;
+		reset-names = "actmon";
+		operating-points = <
+			/* kHz	uV */
+			102000	800000
+			204000	800000
+			300000	820000
+			396000	850000
+			528000	880000
+			600000	910000
+			792000	980000
+			924000	1010000
+		>;
+	};
-- 
1.9.3
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help