This patch adds device tree binding documentation for
1.5A Step-Up Current Regulator for Flash LEDs.

Signed-off-by: Jacek Anaszewski <redacted>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <redacted>
Cc: Richard Purdie <redacted>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <redacted>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <redacted>
Cc: Kumar Gala <redacted>
Cc: <redacted>
---
 .../devicetree/bindings/leds/leds-aat1290.txt      |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-aat1290.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
new file mode 100644
index 0000000..17b8f05
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-aat1290.txt

@@ -0,0 +1,17 @@
+* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+Required properties:
+
+- compatible : Must be "skyworks,aat1290".
+- gpios : Two gpio pins in order FLEN, EN/SET.
+- flash-timeout-microsec : Maximum flash timeout in microseconds -
+			   it can be calculated using following formula:
+			   T = 8.82 * 10^9 * Ct.
+
+Example:
+
+flash_led: led {
+	compatible = "skyworks,aat1290";
+	gpios = <&gpj1 1 0>, <&gpj1 2 0>;
+	flash-timeout-microsec = <1940000>;
+}

-- 
1.7.9.5