Thanks, Shawn.
On Wed, Nov 12, 2014 at 06:56:22PM +0800, Shawn Guo wrote:

On Wed, Nov 12, 2014 at 04:20:36PM +0800, Robin Gong wrote:

quoted

Resend the patchset  with the latest MAINTAINERS
Add simple power off driver for i.mx6, including:
- add basic imx-snvs-poweroff driver in drivers/power/reset
- add device node in all dts files of i.mx6.
- enable in config file

Change from v3:
- disable poweroff driver in soc level dts and enable it in board level dts
- replace 'EIO' with 'ENODEV' while of_iomap fail.
Change from v2:
- remove useless included head files
- split device binding doc from dts patch
- add description for the case that PMIC_ON_REQ not used as external power
  control

Robin Gong (3):
  ARM: dts: imx6: add pm_power_off support for i.mx6 chips
  power: reset: imx-snvs-poweroff: add power off driver for i.mx6
  ARM: configs: imx_v6_v7_defconfig: add power off driver

I'm fine with the series.  But before I take the patches, I need an ACK
from DT folks on the bindings.

Shawn