Thread (13 messages) flat view 13 messages, 4 authors, 2014-10-02

Re: [PATCH v1 3/5] dtb: Add 10GbE node to APM X-Gene SoC device tree

From: Iyappan Subramanian <hidden>
Date: 2014-10-02 23:17:07
Also in: netdev

On Wed, Sep 24, 2014 at 2:37 AM, Mark Rutland [off-list ref] wrote:
Hi,

For some reason, the below appears to use a mixture of spaces and tabs
for alignment. Assuming my local mailserver isn't responsible for that,
could you please correct that and for consistency use tabs?
I will correct the dtb.  Somehow checkpatch.pl did not catch this.
Could you also please Cc the arm64 maintainers when submitting arm64
patches?
Sure.  Thanks for pointing it out.
On Wed, Sep 24, 2014 at 04:51:26AM +0100, Iyappan Subramanian wrote:
quoted
Added 10GbE interface and clock nodes.

Signed-off-by: Iyappan Subramanian <redacted>
---
 arch/arm64/boot/dts/apm-mustang.dts |  4 ++++
 arch/arm64/boot/dts/apm-storm.dtsi  | 24 ++++++++++++++++++++++++
 2 files changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts
index b2f5622..2ae782b 100644
--- a/arch/arm64/boot/dts/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm-mustang.dts
@@ -32,3 +32,7 @@
 &menet {
      status = "ok";
 };
+
+&xgenet {
+     status = "ok";
+};
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
index c0aceef..ae814ef 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -176,6 +176,16 @@
                              clock-output-names = "menetclk";
                      };

+                        xge0clk: xge0clk@1f61c000 {
+                             compatible = "apm,xgene-device-clock";
+                             #clock-cells = <1>;
+                             clocks = <&socplldiv2 0>;
+                             reg = <0x0 0x1f61c000 0x0 0x1000>;
+                             reg-names = "csr-reg";
+                             csr-mask = <0x3>;
+                             clock-output-names = "xge0clk";
+                        };
+
                      sataphy1clk: sataphy1clk@1f21c000 {
                              compatible = "apm,xgene-device-clock";
                              #clock-cells = <1>;
@@ -421,5 +431,19 @@

                      };
              };
+
+                xgenet: ethernet@1f610000 {
+                     compatible = "apm,xgene-enet";
+                        status = "disabled";
+                        reg = <0x0 0x1f610000 0x0 0xd100>,
+                              <0x0 0x1f600000 0x0 0X400>,
+                              <0x0 0x18000000 0x0 0X200>;
+                     reg-names = "enet_csr", "ring_csr", "ring_cmd";
+                        interrupts = <0x0 0x60 0x4>;
+                     dma-coherent;
+                        clocks = <&xge0clk 0>;
quoted
+                        local-mac-address = [00 01 73 00 00 04];
Does it really make sense to hard-code the same mac address for all
mustang boards?

Mark.
quoted
+                     phy-connection-type = "xgmii";
+                };
      };
 };
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help