Thread (17 messages) 17 messages, 5 authors, 2014-11-03

Re: [PATCH 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.

From: Matthias Brugger <matthias.bgg@gmail.com>
Date: 2014-10-30 12:38:26
Also in: linux-arm-kernel, linux-i2c, lkml

2014-10-29 6:37 GMT+01:00 Xudong Chen [off-list ref]:
quoted hunk ↗ jump to hunk
Add devicetree bindings for Mediatek Soc I2C driver.

Signed-off-by: Xudong Chen <redacted>
---
 .../devicetree/bindings/i2c/i2c-mt6577.txt         | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
new file mode 100644
index 0000000..b4012c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -0,0 +1,37 @@
+* Mediatek's I2C controller
+
+The Mediatek's I2C controller is used to interface with I2C devices.
+
+Required properties:
+  - compatible: value should be either of the following.
+      (a) "mtk,mt6577-i2c", for i2c compatible with mt6577 i2c.
Looking on the datasheet of mt6577 it does not seem that this driver
is really compatible.
I was not able to find the PATH_DIR register neither in the datasheet
nor in the source code.
+      (b) "mtk,mt8127-i2c", for i2c compatible with mt8127 i2c.
+      (c) "mtk,mt8135-i2c", for i2c compatible with mt8135 i2c.
+  - reg: physical base address of the controller and dma base, length of memory mapped
+    region.
+  - interrupts: interrupt number to the cpu.
+  - clock-div: the fixed value for frequency divider of clock source in i2c module.
+    Each IC may be different.
+  - clocks: clock name from clock manager
+  - clock-names: clock name used in i2c driver probe
+
+Optional properties:
+  - clock-frequency: Frequency in Hz of the bus when transfer, the default value is 100000.
+  - mediatek,have-pmic: platform can control i2c form special pmic side.
+  - mediatek,have-dcm: platform has DCM(hardware digital clock manager) property.
+  - mediatek,use-push-pull: IO use push-pull mode.
+
+Example:
+
+       i2c0: i2c@1100d000 {
+                       compatible = "mediatek,mt6577-i2c";
+                       reg = <0x1100d000 0x70>,
+                             <0x11000300 0x80>;
+                       interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+                       clock-frequency = <100000>;
+                       mediatek,have-pmic;
+                       clock-div = <16>;
+                       clocks = <&i2c0_ck>, <&ap_dma_ck>;
+                       clock-names = "main", "dma";
+       };
+
--
1.8.1.1.dirty


-- 
motzblog.wordpress.com
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help