[RFC PATCH v3 4/5] dt-bindings: Document the standard property "poweroff-source"
From: Romain Perier <romain.perier@gmail.com>
Date: 2014-10-14 06:28:26
Also in:
lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Signed-off-by: Romain Perier <romain.perier@gmail.com> --- Documentation/devicetree/bindings/power/poweroff.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/poweroff.txt
diff --git a/Documentation/devicetree/bindings/power/poweroff.txt b/Documentation/devicetree/bindings/power/poweroff.txt
new file mode 100644
index 0000000..845868b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/poweroff.txt@@ -0,0 +1,18 @@ +* Generic Poweroff capability + +Power-management integrated circuits or miscellaneous harware components are +sometimes able to control the system power. The device driver associated to these +components might needs to define poweroff capability, which tells to the kernel +how to switch off the system. The corresponding driver must have the standard +property "poweroff-source" in its device node. This property marks the device as +able to shutdown the system. In order to test if this property is found +programmatically, use the helper function "of_system_has_poweroff_source" from +of.h . + +Example: + +act8846: act8846@5 { + compatible = "active-semi,act8846"; + status = "okay"; + poweroff-source; +}
--
1.9.1